Enel Green Power (EGP), a unit of Italian utility Enel, unveiled its newest Solar Panel at the 8th World Conference on Photovoltaic Energy Conversion this week in Milan, Italy.
The new product is a heterojunction bifacial panel for applications in utility-scale PV projects. It is based on an n-type solar cell with G12 format and a power conversion efficiency of 24.6%.
[Production will begin in September 2023 with the first 400 MW production line of our 3Sun Factory in Catania, Sicily, southern Italy," the head of 3Sun, Eliano Russo, told pv magazine. [The cell efficiency was certified by the Institute for Solar Energy Research Hamelin (ISFH) in Germany. According to our roadmap, however, we should be able to increase the efficiency to 25% efficiency in 2025 and over 26% in the second half of 2026."
The cell has currently a thickness of 150 µm, but the company's roadmap has set a target of 120 µm by the end of 2025.
[Our cell is flexible and, compared to TOPCon and PERC cells, has a higher resistance to mechanical stress," Russo explained. [We conducted several tests which showed that if microcracks arise, they don't expand as significantly as in PERC cells."
The new panel is available in nine versions, with power outputs ranging from 640 W to 680 W and average efficiency spanning from 22.6% to 22.9%. The open-circuit voltage is between 43.3 V and 44.2 V and the short-circuit current ranges from 18.9 A to 19.8 A.
All versions of the solar module measure 2,172 mm × 1,303 mm × 35 mm and weigh in at 36 kg. The maximum system voltage is 1,500 V and the bifaciality reaches 95%. The panel can be used in operating temperatures ranging from -40 C to 85 C, with an operating temperature coefficient of -0.24% per degree Celsius. It is enclosed between 2 mm solar glass with anti-reflective treatment, and also features a junction box with an IP 68 rating and an anodized aluminum frame.
The new products come with 30-year linear power output guarantees and 20-year product guarantees. The degradation in the first year is purportedly 1.0% and 30-year end power output is guaranteed to be no less than 93% of the nominal output power.
